Forestry Helper v1.0.4.1
This mod (formerly “Tree Value Info”) displays helpful information for logs and helps with cutting to desired lengths or weights.
Version 1.0.4.1
– Added a feature which indicates a desired cutting length and snaps the chainsaw to it when the chainsaw is within 20cm of that location
– Added a feature which indicates a target cutting weight
– Added keybinds for these features (default: Z on English keyboards) and for cycling through the indication modes (default: c)
– Renamed mod from “Tree Value Info” to “Forestry Helper” since it is no longer a mere display
Version 1.0.3.1
– Resolved a mod conflict with Wood Harvester Controls and decreased likelyhood of similar conflicts with other mods
– More Russian translations (provided by vitalii2011)
Version 1.0.3.0
– Added more detailed quality information
– Added russian translation (provided by Gonimy-Vetrom)
– Info box is now displayed while sitting in a wood harvester
Version 1.0.2.0:
– Info Box is now displayed whenever the ring around a piece of wood is visible (caused by an equipped chainsaw)
– Removed cut length recommendation (too inaccurate) and added quality
Version 1.0.1.0:
– Added wood chip info
The mod offers three modes for cutting with a chain saw, through which you can cycle with a customizable keybind (default: C):
– “Indication Mode: Off”: Base game behavior
– “Indication Mode: Length”: Cut to exact lengths from 1-12 meters (Cycle lengths with key Z)
– “Indication Mode: Weight”: Cut to pieces that can be carried. This produces pieces less than the given weight limit most of the time.
The weight mode is however just a rough estimate and can deviated by up to 100kg from the target weight, especially for things like oak trees.
The weight mode can scale up to 1000kg to match the possible strength settings of the Lumberjack mod.
With any of the active indication modes, the chainsaw will snap to the indicated location once within 20cm. The angle still has to be adjusted manually, however.
The information displayed in the help window is:
– The volume of the piece of wood in liters. This is also being displayed before felling.
– The current value, which is the amount of money you would get if you sold the piece of wood in its current form.
– Hints on which kind of factors could reduce the value of the piece of wood like the shape, the length and the number of branches still attached.
– The total quality of the piece of wood as calculated by the game, where 120% is the maximum.
– The amount of liters you would get when processing the piece of wood with a wood chipper.
– The amount of money you would get if you sold the wood chips right now.
– An estimation of money you would get if you sold the wood chips at best price (sometimes you can get more than that, due to randonmness).
Note that in order to get the maximum quality possible, a piece of wood needs to be a near-perfect frustum of a cone, between 6-11m in length (about 20-36 feet) and may not have any branches still attached.
A perfect shape is not possible for every piece of wood.
The info box will also be displayed whenever a chainsaw is equipped and the ring around the tree to be cut is possible.
While sitting in a wood harvester, you will see basic information about the tree, but no quality details, since those can only be calculated for the full tree, not for the next piece to be cut unfortunately.
It is recommended to use the lumberjack or the measure mod to find the desired cut position.
