Vensys Windturbines v2.1
Vensys wind turbines with different hub heights
Version 2.1.0.0
MB 140m and 162m have been revised.
In some systems you can switch between German and international obstacle markings (see description!).
Hello everyone!
This mod consists of 6 wind turbines with different hub heights.
The following are the features of the systems:
All systems align with the wind and change their speed depending on the wind speed.
Anemometers are animated and adapt to the wind speed.
Obstacle markings adapt to the lighting conditions in different seasons.
The purchase price and the income from the individual systems are now calculated based on the defined nominal output, the length of the rotor blades and the height of the tower.
This means that the purchase price is calculated as follows: 100,000€/1000kW nominal power + 500€/1m rotor blade length + 100€/1m tower height.
The income consisted of 1000€/1000kWh (the nominal power is used as the value for this) + 5€/1m rotor blade length + 1€/1m tower height.
It is possible to switch off ALL systems “visually”. For this purpose, there is a trigger in front of the door at the foot of the tower of EACH system, where you can switch the system on and off using the left mouse button or the B button on the controller. For this purpose, the rotor blade position changes and the rotor only spins slightly. The systems still generate money, therefore only “visually”. As far as I know, this cannot be implemented any other way; after all, you have to take into account that the FS22 is an agricultural simulation and not a wind power simulation.
The following attachments are included:
Vensys 100: 75m(***) and 100m(***) hub height (nominal power: 2.5 MW)
Vensys 112: 93.5m(***) and 140m(*) hub height (nominal power: 2.5 MW)
Vensys 115: 72.5m(***) and 92.5m(***) hub height (nominal power: 4.1 MW)
Vensys 120: 90m(***) and 140m(*) hub height (nominal power: 3.0 MW)
Vensys 126: 87m(***), 97m(***) and 137(*) hub height (nominal power: 3.8 MW)
Vensys 136: 97m(***), 132m(*) and 162m(*) hub height (nominal power: 3.5 MW)
Legend:
(*): German obstacle markings.
(**): International obstacle marking.
(***): You can switch between both.
